Whether it is an npk production line or an organic fertilizer production line, the basic equipment includes: crusher, feeder, horizontal mixer, fertilizer granulator, dryer, cooler, screening machine, weighing and packaging machine. Common organic fertilizer granulators include: double roller granulator, stock granulator, disc granulator machine, new organic fertilizer granulator, etc. During the production process of the fertilizer production line, the fertilizer must be transported , then you need a conveyor. Common conveyors include: belt conveyors, bucket elevators, large inclination belt conveyors, screw conveyors, etc. Today, let's take a look at the reasons for the failure of bucket elevators.
Since the bucket elevator is started and used through the operation of the switching power supply, it is difficult to avoid problems on the motor during use. When the bucket elevator motor is abnormal. Please don't panic. In this case, close the program as soon as possible. Find professional technicians to investigate common faults and find out the main cause of the problem. The following is a detailed description of the reasons for the failure of the bucket elevator motor, hoping to help you.
1. If the power of the motor you use does not match the bucket elevator you configured, the working voltage is too low, the raw materials cannot be transported normally, and the machine is likely to suspend operation. At this time, the motors must be disassembled and replaced to find all the motors that are consistent with the operating power of the bucket elevator.
2. Check whether it is the cause of poor installation quality or the difference between the motor and the spindle of the machine tool. Check if the motor is overheating when clearing installation common problems, based on a specific search by engineering construction technicians. If power engineering is popular, consider whether it is caused by excessive use time, and need to analyze detailed problems in depth.
3. Check whether the pressure of the packing screw cap is too tight or the adjustment of the mechanical seal torsion spring is too tight, and adjust the reduction of the screw cap or the mechanical seal torsion spring again.
