The organic fertilizer disc mixer is a machinery mainly used for mixing raw materials. The machine is lined with polypropylene or stainless steel plates, which are not easy to stick and wear resistant. The use of a cycloidal needle wheel reducer has the advantages of compact structure, convenient operation, uniform mixing, and convenient unloading and transportation. The materials are thoroughly mixed, thereby improving the uniformity of mixing. A novel rotor structure is adopted, which allows the minimum gap between the rotor and the shell to be adjusted to close to zero, effectively reducing the residual amount of materials. The disc is lined with polypropylene or stainless steel plates, which is not easy to stick, wear resistant, and uses a cycloidal needle wheel to reduce speed. It has the characteristics of compact structure, convenient operation, uniform mixing, and convenient unloading and transportation. The overall structure is more reasonable, with beautiful appearance and convenient operation and maintenance.
The organic fertilizer pan mixer is mainly used for mixing raw materials, and the pan is lined with polypropylene or stainless steel plates, so it is not easy to stick materials. Wear-resistant, using a cycloidal pin wheel reducer has the characteristics of compact structure, convenient operation, uniform mixing, and convenient unloading and transportation.
The organic fertilizer pan mixer is a new type of equipment that has been improved on the original mixer. Mainly used in organic fertilizer materials, compound fertilizers, and dust collectors in thermal power plants, it can also be used in industries such as chemical metallurgy, mining, and building materials. Its main characteristics are as follows
1. It has high mixing efficiency and a small footprint. The spiral blades are made of high wear-resistant special alloys.
The 2-axis wet mixer adopts a reducer transmission, which rotates smoothly and has low noise
The 3-axis mixer is fed from the top and discharged from the bottom, with a reasonable structure
The sealing between each joint surface is tight and the operation is smooth.
Use and maintenance of organic fertilizer disc mixer
1. Installation: Place the machine stably, install the machine feet, and level them to ensure smooth operation of the machine.
2. Before use, add oil to the area that needs to be refueled, and then carry out no-load operation. Check whether all fasteners are loose, whether electrical and mechanical operations are normal. If there are any abnormalities, repair and debug them.
3. Turn the feeding port to the top, open the feeding cover for feeding, and do not exceed the specified volume. Then, close the feeding cover tightly and start the machine for operation. If any abnormalities are found during the process, the machine must be stopped for inspection.
4. After work or when changing varieties, the inside and outside of the hopper must be washed clean.